Metallic Epoxy LV (Low Viscosity)
| /
Quick Specs:
- 12 m2 per 3Gal kit
- Pot life 5-10 minutes
- Working time on floor 45-60 minutes
- Full cure 5-7 days (as finish coat)
- Critical recoat time 12 hours
- 100% Solids 2:1 mix epoxy
- Zero VOC
- Essentially odourless
E2U Metallic Epoxy LV is a high performance modified cycloaliphatic epoxy. Typically applied as a 500 micron + (0.5mm) thick single coat. E2U Metallic Epoxy is designed to achieve dynamic blends without the need for activators to be sprayed on the surface to obtain a unique and highly decorative look. LV has further enhanced flow-ability and self-levelling characteristics to our original Metallic Epoxy.
E2U Metallic Epoxy LV is supplied clear, metallic pigments will need to be purchased separately.
Typically paired with Water Based Epoxy as a primer or 6150RC where slab moisture is present. Can be top coated with any clear coat from our range for added durability and UV resistance.
This product is not intended for use in areas where it will be subjected to unfiltered (no glass, windows etc,) UV light, including artificial UV as it will amber over time. While clear coats will slow this process they don't eliminate it completely. If complete UV stability is required please contact an Epoxy2U Australia representative for options.