Free shipping to commercial addresses on orders over $500ex Aus wide. T's&C's apply

Epoxy2U Australia
1800 003 832

1/23 Packer Road, Baringa, 4551, QLD

The FastFlake System

From Epoxy2U Australia
Same day, in and out.

Fast Epoxy Flake Same Day

Epoxy flake floors in a fraction of the time.

Tradesmen utilising the Epoxy2U products in this system can complete a double garage from prep to topcoat in 6 hours, same day

Utilising 6150RC and Polyaspartic85 with appropriate labor and preparation equipment means HUNDREDS of square meters of flake flooring can be completed in a single day. We have had applicators report completing 500-800m2 in a single day. All while curing fast for the client, with low odor and ZERO VOCs. The FastFlake system is a better experience for everyone involved.

6150RC-600-w-banner.jpg
6150RC-600-w-banner.jpg

6150RC

*This product is intended for professional use only*
Quick Specs:
  • Average Coverage: 40m2 per Kit
  • 100% Solids
  • Cured for flake recovery in 2 hours
  • Recoat time: 2 hours
  • Pot life 3-5 minutes
  • Working time on floor: 15-20 minutes
  • Primer/Base Coat in one
  • Moisture blocking ability built in
  • Available primarily in Light Grey and Beige
  • Other colours: please contact us
  • Adhesion warranty*

E2U Epoxy 6150RC (Rapid Cure) is a key component of our FastFlake System. E2U 6150RC is fast curing, VOC compliant, 100% solids, 2-component product for base coats and broadcast coats of colour flake(chip) etc. flooring.

6150RC provides excellent adhesion and hide to concrete in a single coat application.
6150RC also withstands up to 9 lbs (6.9% MC) of moisture vapor emissions removing the need for barrier coats in many situations. E2U 6150RC adheres to damp or dry concrete and gives ample open time for broadcasting media into the coating.

*Full broadcast or pigmented topcoat and proper mechanical preparation is required to get adhesion warranty.


GW 10 kg
View details

Polyaspartic85

View Details

Flake

Our standard range of flakes consists of 8 popular flake combinations, making colour choice less overwhelming for clients. Any brand of flake or other broadcast media can be used in the FastFlake system, but please do a test first or contact E2U Australia for advice as other brands, sizes, materials, etc. of flake and broadcast media can require different methodologies and may impact consumption of 6150RC and Poly85.

flake chip colours sample board epoxy

Got any questions? Want to request a trade account to view FastFlake pricing? Enquire below.

*Practical coverage may vary. Coverage is affected by factors such as: substrate porosity, surface profile, and application method.