Unlock Superior Adhesion with E1‑NG No Grind Primer
Looking for a primer that bonds seamlessly to concrete, tile, or existing coatings—without the hassle of grinding? Meet E1‑NG Primer from Epoxy2U. Engineered as both a direct‑to‑substrate and inter‑coat adhesion fusion primer, E1‑NG creates a molecular bond between your substrate and topcoat, delivering a chemically fused, rock‑solid foundation for any epoxy system.
Key Benefits
-
No Grinding or Profiling Required
As long as surfaces are clean and free of oils, greases, or other bond breakers, E1‑NG grips tightly—saving you hours of prep time. -
Universal Compatibility
Works on concrete, tile, steel, and most existing coatings. Pair it with any Epoxy2U resin product for a flawless finish. -
Stronger Chemical Bond
The molecular adhesion technology ensures your floor resists delamination, peeling, and wear—even under heavy use. -
Fast‑Track Your Project
Ready to recoat in as little as 15-20 minutes at 20 °C. Perfect for weekend DIYers or installers on tight schedules.
How to Use E1‑NG Primer
-
Prepare: Clean substrate thoroughly—remove dust, oil, wax, and loose particles.
-
Mix: Combine E1-NG Primer and acetone as per instructions; mix by hand for 60-90 seconds.
-
Apply: Roll or squeegee at 9-10 m²/L.
-
Topcoat: Once tack‑free (15-20 minutes @ 20 °C), apply your chosen epoxy or polyaspartic topcoat. You have up to 50-60 minutes to do so before reapplication is required. Plan to start coating the E1NG as soon as its ready.
Tips & Tricks
-
Use a solvent resistant sprayer to apply evenly to the surface
Ready to transform your floor? Order E1‑NG No Grind Primer from Epoxy2U today—fast shipping Australia‑wide!
Purchase E1NG HERE
